Menu

Discover Your Need for Mold Testing in Philadelphia

As the media loves to remind us, mold on walls, your ceiling, and tile floor isn’t just unsightly. It turns out that some species of mold can actually be dangerous.

But the CDC reports that the overwhelming majority of mold species are not toxic (that is, they don’t produce toxic spores). In fact, some minor mold infestations don’t need hazmat suits to take care of the issue. But then again, some do.

So how do you figure out if you need to call in the professionals? Most sources will tell you that you should get your mold tested to see if it is a big enough problem to call professional remediation. But what if you’re really on the fence and can’t tell if you even need professional testing? If your mold problem is small but keeps coming back, or if you’re not sure quite how bad it is, this beginner’s guide to determining if you need mold testing in Philadelphia is for you.

**Please note, these DIY tips are for buildings that do not inhabit people of an autoimmune or compromised condition. If there are people in your building with these conditions, you should consult a mold testing and remediation company immediately.

How to DIY Before You Call Professional Mold Testing in Philadelphia

Follow these simple steps to figure out if you should hire professional mold testing in Philadelphia.

  1. Find out how far the mold has spread on the surface you can see. You need to assess the extent of the mold infestation. That could mean taking frames off of walls, peeling away bubbled paint (that will need to be replaced anyway), or removing damaged tiles. Try to get a good feel for how far the mold has spread across this one surface. If the area is more than 10 ft square, you should call professional mold testing in Philadelphia. It will be extremely difficult to remove that much mold on your own without causing damage, and you need professional testing to figure out exactly what needs to go.
  2. Find out how far the mold has penetrated. Now you need to discover how deep the mold goes. Mold likes to grow in damp spaces behind walls, in between sheets of drywall, and in the ventilation systems. You’ll need to crack these open to check if mold has made its way inside. A professional has thermal imaging tools that can check for this without causing any damage, but you’ll need to do it manually. Mold that lives inside these damp and hard-to-reach spaces can be the cause of an infestation that keeps coming back. If you have mold in your ventilation system or inside your walls, you need professional mold testing in Philadelphia. Without special gear, there is no telling how far the infestation has gone if it has gotten into these hard-to-see spaces.
  3. Find the source of the moisture. Mold has to grow in damp spaces, so there must be a leak of some kind somewhere. It could be a leaky pipe, a crack in the roofing or cladding, or even just some moist air entering the space from somewhere. If you can stop the leak, do so as soon as possible to stop the mold from spreading. If you can stop the leak and make sure the space stays completely dry, you’re probably OK. If you can’t, you should call for professional mold testing in Philadelphia. A leak that is difficult to stop has likely led to more mold infestation than you can see, and you’ll need to know what you’re dealing with.

It never hurts to give us a call, even if you’re planning on handling your mold problem yourself. Call Advanced Mold Diagnostics today to find out what we can do for you. 1-800-642-8305.

 

Related Tags: Mold Testing in Philadelphia | PA Mold Testing

WHAT CAN WE HELP YOU WITH TODAY?
PROVEN. TRUSTED. ACCURATE. FOR OVER 20 YEARS
Commercial
Residential